Quick Answer: What Does Lo Mean On Exergen Thermometer?

Can you calibrate an exergen thermometer?

Exergen offers two options in using Temporal Artery Thermometers.

The standard TemporalScanner is calibrated to provide a true core temperature, and the other is the same instrument, but recalibrated to display an oral equivalent temperature..

What temperature is normal?

The average normal body temperature is generally accepted as 98.6°F (37°C). Some studies have shown that the “normal” body temperature can have a wide range, from 97°F (36.1°C) to 99°F (37.2°C). A temperature over 100.4°F (38°C) most often means you have a fever caused by an infection or illness.

Do digital thermometers read low?

The researchers found that five of the thermometers produced readings within . 07 degrees Celsius of the reading on the reference thermometer (a mercury thermometer brand most often used by the clinic), but two of the digital units registered lower average temperatures. One produced a reading lower by .

How do you reset an exergen thermometer?

To Restart: Depress the button to restart. It is not necessary to wait until the display is clear, the thermometer will immediately begin a new scan each time the button is depressed and held depressed.

Why is my temporal thermometer low?

Low Readings Can be Caused by a Dirty Lens To clean, simply twirl a cotton tipped swab (Q-Tip) dampened in alcohol on the lens, deep in the center of the probe. Preferred site is the temporal artery area. Here, behind the ear could be alternate site, as both are exposed.

How do I fix the LO on my thermometer?

The ‘Lo’ or ‘Hi’ indications on the display mean that the temperature cannot be measured because the temperature is outside the temperature range. Press the on/off button to switch off the thermometer. Check if it is correctly positioned, press the on/off button again to switch it on, and re-start the measurement.

Why does my thermometer give me different readings?

Quick Introduction. While taking an oral temperature measurement may seem easy, it isn’t as simple as it looks. Simply sticking a thermometer into a person’s mouth may not give accurate results, because different areas in the mouth give off varying levels of heat.

Are digital thermometers accurate?

For digital stick thermometers, accuracy is required to ± 0.2°F or 0.1°C (when tested on a water bath), within the range of 98°F and 102.0°F.

What does Lo mean on a thermometer?

LOW TEMPERATUREIt is standard practice for the majority of digital thermometers to display a “LO” sign when turning the device on. This means “LOW TEMPERATURE”. … This is because these types of thermometers are made to measure Body Temperature, so when outside the body, the temperature is usually LOWER.

What does Lo mean on a Braun digital thermometer?

too low Temperature takenLO = too low. Temperature taken is not within typical human temperature range (34 – 42.2 °C or 93.2 –108 °F). Make sure the probe tip and lens are clean and a new, clean lens filter is attached. Make sure the thermometer is properly inserted.

How do I know if my digital thermometer is working?

For digital thermometers: Test every six months or so (depending on frequency of use) to make sure the thermometer works properly, using either the ice water or boiling water method. Many digital thermometers have reset buttons. If the accuracy is off, adjust the thermometer to the proper temperature using this button.